| Electrical Current Rating (Amperes) | | |
| Power Only | 10 amps (20 AWG) | 10 amps (20 AWG) |
| Signals Energized (20 AWG) | 10 amps | 10 amps |
| Signals Energized Using PPMX Contacts (20 AWG) | 3 amps | 3 amps |
| Wire to Wire & Wire to Panel Mount with Ground | 140 amps (4 AWG) | 135 amps (4 AWG) |
| Wire Plug to Panel Mount Receptacle | 140 amps (4 AWG) | 135 amps (4 AWG) |
| Panel Mount Plug to Panel Mount Receptacle | 135 amps (4 AWG) | 130 amps (4 AWG) |
| Voltage Rating (AC/DC) | 600V | 600V |
| Dielectric Withstanding Voltage (Volts AC) | 2,200 | 2,200 |
| Average Mated Contact Resistance (Milliohms) | | |
| Power (1/4 in. of 4 AWG Wire) | 0.16m | 0.16m |
| Ground (1/4 in. of 6 AWG Wire) | 0.22m | N/A |
| Auxiliary (14 AWG Wire) | 2.50m | 2.50m |
| UL Hot Plug Current Rating (Amperes) | 50A (4 AWG Wire) | 50A (4 AWG Wire) |
| Short Time Current Test | 1530 Amps (6 AWG Wire, 6 Seconds) | 1530 Amps (6 AWG Wire, 6 Seconds) |
| Mechanical | | |
| Wire Size Range (Power Contacts) | 10 to 4 AWG (2.5 to 25.0 mm) | 10 to 4 AWG (2.5 to 25.0 mm) |
| Wire Size Range (Auxiliary Contacts) | 14 to 24 AWG (1.5 to 0.50) | 24 to 20 AWG (0.50 to 0.75 mm) |
| Wire Size Range (Ground Contacts) | 12 to 6 AWG (2.5 to 16mm) | 12 to 6 AWG (2.5 to 16mm) |
| Maximum Wire Insulation Diameter (Power/Ground) | 0.44 in. (11.18 mm) | 0.44 in. (11.18 mm) |
| Maximum Wire Insulation Diameter (Auxiliary) | 0.44 in. (11.18 mm) | 0.44 in. (11.18 mm) |
| Operating Temperature | -20C to 105C (-4 F to 221F) | -20C to 105C (-4 F to 221F) |
| Mating Cycles (No Load by Plating) | 5,000 | 5,000 |
| Average Mating / Unmating Force (4 AWG Wire) | 6.5 Lbs / 2.95 Kg | 6.5 Lbs / 2.95 Kg |
| Average Mating / Unmating Force (Ground Wire 6 AWG) | 12 Lbs / 5.44 Kg | 12 Lbs / 5.44 Kg |
| Pull Out Force with Cable Clamp | 60 lb. [267N] | 60 lb. [267N] |
| Push Out Retention Force (Auxiliary) | 35 lb. [156N] | 35 lb. [156N] |
