| Material Specification | Housing | | High Temperature Resistant Plastic, UL94 V-0 |
| Contacts | | Copper Alloy |
| Front Shell | | Stainless Steel |
| Plating Specification | Contacts (Under Plated) | | Ni 30u" MIN. Over All |
| Contacts (Functional Area) | | Au Plated (Gold plating thickness follow P/N) |
| Front Shell | | Ni 50u" MIN. Under Plated Over All |
| Shield Plate & EMI Plate | | Clear Only |
| Mechanical Performance | Insertion Force | After connecting and disconnecting using standard plug gauge 3 times | 0.5~2.0 kgf |
| Removal Force | After connecting and disconnecting using standard plug gauge 3 times | 0.8~2.0 kgf |
| Durability | | 10000 Cycles |
| Electrical Performance | Current Rating | VBUS & GND Pins and Other Pins | 3.0A |
| Voltage Rating | | 5.0V |
| Contact Resistance | Measured at small current (100mA or less) 1000Hz | 40m MAX (Pins), 50m/MAX (Shield), 10m MAX Change of All Pins |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min | 100M MIN |
| Dielectric Withstand Voltage | AC 100V for 1 minute | |
| Operating Temperature | | -25C ~ +85C | |
| Environmental Performance | Solderability Test | Terminal dipped 1mm in solder bath of 2505 for 50.5 seconds | Solder wetting time 3 sec, Soldering area > 75% |
| Resistance to Soldering Heat Test (Reflow) | Peak temperature 2605 within 20 seconds | No deformation of case or excessive looseness of terminals, electrical characteristics satisfied |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 sec | No deformation of case or excessive looseness of terminals, electrical characteristics satisfied |
| Humidity Test | Stored at 402 and 90%-96% humidity for 96 Hr, then 1 Hr at standard atmospheric condition | No damage on appearance, mechanical and electrical characteristics satisfied |
| Heat Test | Stored at 702 for 96 hours, then 1 hour recovery | No damage on appearance, mechanical and electrical characteristics satisfied |
| Cold Test | Stored at -253 for 96 hours, then 1 hour recovery | No damage on appearance, mechanical and electrical characteristics satisfied |
| Life Test | Without Load | Connection and disconnection for 10000 cycles at 10 to 25 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8 to 2.0N, Mechanical and Electrical characteristics satisfied |
| With Load (Rating Condition) | Connection and disconnection for 10000 cycles at 10 to 20 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8 to 2.0N, Mechanical and Electrical characteristics satisfied |
| Temperature Cycling Test | 5 cycles of specified temperature profile (e.g., 80 to -40) | No deformation or cracks, Insertion/Extraction Force 3 to 20N, Contact Resistance Max. 30m, Insulation Resistance Min. 100 M, Dielectric Withstanding Voltage 100VAC/min |
| Cold & Heat Shock Test | 5 cycles of specified temperature profile (e.g., 70 to -20) | No deformation or cracks, Insertion/Extraction Force 3 to 25N, Contact Resistance Max. 30m, Insulation Resistance Min. 100 M, Dielectric Withstanding Voltage 500VAC/min |
