| Electrical Characteristics | Rated Voltage | 20V DC |
| Rated Current | 3A (VBUS pin: 1.25A, GND pin: 1.25A, other pins: 0.25A) |
| Contact Resistance | 40m Max (Measured at 20mV, 100mA) |
| Insulation Resistance | 100M Min |
| Withstand Voltage | 100V AC |
| Mechanical Performance | Insertion Force | 0.5-2.0Kgf |
| Extraction Force | 0.6-2.0Kgf |
| Durability | 5000 Cycles |
| Materials | Housing (Core) | LCP UL94 V-0 |
| Terminal | C2680, T=0.2mm; Nickel base, Gold plated |
| Shell | Stainless Steel 201-H, Nickel plated surface |
| Temperature Range | Operating | -30 to +80 |
| Environmental Conditions | Standard Atmospheric Conditions for Measurement | Temperature: 5 to 35, Humidity: 45% to 85%, Pressure: 86Kpa to 106Kpa |
| Durability Tests | Solderability Test | Terminal dipped 1mm in solder bath (2505 for 50.5s). Solder wetting time 3s, Soldering area > 75%. |
| Resistance to Soldering Heat Test (Reflow) | Preheat to 180 (120s), Peak temp 2605 (within 20s). No deformation. |
| Resistance to Soldering Heat Test (Iron) | Bit temp 3305, Application time 30.5s. No deformation. |
| Humidity Test | 402, 90%-96% RH for 96Hr, then 1Hr at standard conditions. No appearance damage. |
| Heat Test | 702 for 96 Hours, then 1Hr at room temp. No appearance damage. |
| Cold Test | -253 for 96 Hours, then 1Hr at room temp. No appearance damage. |
| Life Test (No Load) | 5000 cycles at 10-25 cycles/min. |
| Life Test (With Load) | 5000 cycles at 10-20 cycles/min under rating conditions (non-inductive load). Contact Resistance 0.1, Extraction Force 0.8-2.0N. |
| Temperature Cycling Test | 5 cycles of specified temperature profile. Insertion/Extraction Force: 3-20N, Contact Resistance: Max. 30m, Insulation Resistance: Min. 100 M, Dielectric Withstanding Voltage: 100VAC/min (between terminals). No deformation or cracks. |
| Cold & Heat Shock Test | 5 cycles of specified temperature profile. Insertion/Extraction Force: 3-25N, Contact Resistance: Max. 30m, Insulation Resistance: Min. 100 M, Dielectric Withstanding Voltage: 500VAC/min (between terminals). No deformation or cracks. |
