| Materials & Characteristics | Core Material | - | LCP+30%G.F UL94V-0 |
| Terminal Material | - | High Conductivity Copper C7025/C2680 |
| Housing Material | - | SUS201/SUS304, T=0.30mm |
| Center Clip Material | - | SUS301 |
| Rated Current | - | 5A |
| Working Temperature | - | -30+80 |
| Mechanical Properties | Connection Force | After connecting and disconnecting 3 times using standard plug gauge | 5-20N |
| Disconnection Force | After connecting and disconnecting 3 times using standard plug gauge | 8-20N (Initial)
6-20N (After durability) |
| Durability | - | 10000 cycles |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) for 1 min in any direction | No damage to terminal; electrical and mechanical characteristics satisfied |
| Electrical Properties | Contact Resistance | Measured at small current (100mA) | 40m MAX (Initial)
0.1 (After Life Test) |
| Insulation Resistance | Apply 100V DC for 1 min | 100M MIN |
| Dielectric Strength | AC 100V RMS (50~60Hz) for 1 min | No damage, arcing, or breakdown |
| Environmental & Heat Resistance | Resistance to Soldering Heat Test (SMT Reflow) | Peak 2605 within 20 seconds | No blistering, melting, discoloration, or warping beyond tolerance; mechanical and electrical characteristics satisfied |
| Salt Spray Test | - | 24H MIN |
| Soldering | Solderability Test | Terminal dipped 1mm in solder bath at 2505 for 50.5 seconds | Solder wetting time 3 sec; Soldering area > 75% |
| Resistance to Soldering Heat Test (Soldering Iron) | Bit temperature 3305, application time 30.5 sec | No deformation of case or excessive looseness of terminals; electrical characteristics satisfied |
| Temperature & Humidity Tests | Humidity Test | 402, 90%-96% RH for 96 Hr | Appearance and characteristics satisfied after 1 Hr recovery |
| Heat Test | 702 for 96 Hours | Appearance and characteristics satisfied after 1 Hr recovery |
| Cold Test | -253 for 96 Hours | Appearance and characteristics satisfied after 1 Hr recovery |
| Temperature Cycling | 5 cycles (details in figure) | No deformation or cracks; Insertion/Extraction Force: 3-20N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 100VAC/min (between terminals) |
| Cold & Heat Shock | 5 cycles (details in figure) | No deformation or cracks; Insertion/Extraction Force: 3-25N; Contact Resistance: Max. 30m; Insulation Resistance: Min. 100 M; Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
